2105450008 read psw
Добавлено: 18 янв 2021, 22:13
Здравствуйте есть замок с рабочим ключем 2105450008 ключ нек. Пытаюсь вычитать пароль, подключение 3 (при наличии ключа) не рассчитывает.
версия программы последняя.
этот замок тестировался ?
K линии замка и блокиратора объединять ? немножко не понятно по схеме. пробовал и так и так.
щас конечно проц вычитаю, но на будущее хотелось бы знать что не так делаю ?
Start the password recovery procedure.
1. Connect the EZS according to the diagram #3 and turn on the ignition with the native key.
The EZS data is read.
2. Turn off the ignition and remove the key from the EZS.
3. Insert the key into the coil of the device and wait for the end of calculations.
No response to a service command.
Error! The Key data has not been read.
Completed.
версия программы последняя.
этот замок тестировался ?
K линии замка и блокиратора объединять ? немножко не понятно по схеме. пробовал и так и так.
щас конечно проц вычитаю, но на будущее хотелось бы знать что не так делаю ?
Start the password recovery procedure.
1. Connect the EZS according to the diagram #3 and turn on the ignition with the native key.
The EZS data is read.
2. Turn off the ignition and remove the key from the EZS.
3. Insert the key into the coil of the device and wait for the end of calculations.
No response to a service command.
Error! The Key data has not been read.
Completed.